China Standard Planar Double Enveloping Worm Gear Unit with Hollow Shaft

Product Description

 Planar Double Enveloping Worm Gear Unit With Hollow Shaft
 

Working conditions

Two shafts for 90 ° Intersect, input speed must not be more than 1500 rpm.The working environment temperature should range from  0 ~ 40 ° C, when the environment temperature below 0 ° C or above 40 ° C.Before starting the lubricating oil to corresponding heating and cooling, The worm shafts, reverse operation can be positive.

Data sheet on CUW double enveloping worm gear reducer :

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 2571~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

Can you explain the role of a worm wheel in conjunction with a worm gear?

In mechanical systems, a worm wheel and a worm gear work together to achieve the transmission of motion and power between two perpendicular shafts. The worm gear is a screw-like gear, while the worm wheel is a circular gear with teeth cut in a helical pattern. Here’s a detailed explanation of the role of a worm wheel in conjunction with a worm gear:

The primary function of a worm wheel and worm gear combination is to provide a compact and efficient means of transmitting rotational motion and power at a right angle. The interaction between the worm gear and the worm allows for high gear reduction ratios, making it suitable for applications that require large speed reductions and high torque output.

The worm gear, or worm, is a threaded shaft resembling a screw. It is the driving component of the system and is typically turned by a motor or other power source. The threads on the worm engage with the teeth of the worm wheel, causing the wheel to rotate.

The helical shape of the worm gear teeth and the orientation of the threads on the worm are designed to ensure smooth and efficient power transmission. As the worm rotates, the sliding action between the threads of the worm and the helical teeth of the worm wheel enables the transfer of motion.

The gear ratio between the worm and worm wheel determines the speed reduction and torque multiplication achieved. The number of teeth on the worm wheel compared to the number of threads on the worm determines the gear ratio. For example, a worm wheel with 40 teeth and a worm with one thread would result in a gear ratio of 40:1, meaning the output shaft of the worm wheel rotates once for every 40 rotations of the worm.

The key role of the worm wheel is to receive the rotational motion from the worm and transmit it to the output shaft. It converts the rotary motion of the worm into rotary motion in a different direction, typically at a right angle.

The worm wheel also provides mechanical advantage by multiplying the torque output. Due to the helical shape of the teeth, the sliding action between the worm and the worm wheel allows for a larger contact area and load distribution, resulting in increased torque output at the output shaft.

The combination of the worm gear and worm wheel offers several advantages in mechanical systems:

  • High Gear Reduction: The worm gear and worm wheel enable significant speed reduction while increasing torque output, making them suitable for applications requiring high torque and low speed.
  • Self-Locking: The friction between the worm gear and the worm prevents backdriving, allowing the worm wheel to maintain its position even when the driving force is removed.
  • Compact Design: The perpendicular arrangement of the worm gear and worm wheel allows for a compact and space-saving design, making it advantageous in applications with limited space.
  • Quiet Operation: The sliding action between the worm gear and worm wheel helps distribute the load over multiple teeth, resulting in smoother and quieter operation.
  • Directional Control: The worm gear and worm wheel combination can provide unidirectional motion, preventing motion from the output side back to the input side due to their self-locking property.

Worm gear and worm wheel systems are commonly used in various applications, including automotive, industrial machinery, elevators, conveyor systems, and robotics. Their unique characteristics make them suitable for tasks that require precise control, high torque, and compact design.

It is important to note that proper lubrication, maintenance, and design considerations are crucial for ensuring the reliable and efficient operation of worm gear and worm wheel systems. Regular inspections and adherence to manufacturer guidelines are essential for maximizing the lifespan and performance of these components.

Can you explain the impact of worm wheels on the overall efficiency of gearing systems?

Worm wheels have a significant impact on the overall efficiency of gearing systems. Here’s a detailed explanation of their influence:

  • Gear Reduction: Worm wheels are known for their high gear reduction ratios, which means they can achieve significant speed reduction in a single stage. This is due to the large number of teeth on the worm wheel compared to the number of starts on the worm. The gear reduction capability of worm wheels allows for the transmission of high torque at low speeds. However, it’s important to note that the high gear reduction also leads to a trade-off in terms of efficiency.
  • Inherent Efficiency Loss: Worm gears inherently introduce some efficiency loss due to the sliding action that occurs between the worm and the worm wheel. This sliding action generates friction, which results in energy losses and heat generation. Compared to other types of gears, such as spur gears or helical gears, worm gears typically have lower efficiency levels.
  • Self-Locking Property: One unique characteristic of worm wheels is their self-locking property. When the worm wheel is not being actively driven, the friction generated between the worm and the worm wheel prevents the worm wheel from rotating backward. This self-locking feature provides stability and prevents the system from backdriving. However, it also contributes to the overall efficiency loss of the gearing system.
  • Lubrication and Friction: Proper lubrication of worm wheels is crucial for reducing friction and improving their efficiency. Lubrication forms a thin film between the worm and the worm wheel, reducing direct metal-to-metal contact and minimizing frictional losses. Insufficient or improper lubrication can lead to increased friction, higher energy losses, and reduced efficiency. Therefore, maintaining appropriate lubrication levels is essential for optimizing the efficiency of worm gear systems.
  • Design Factors: Several design factors can impact the efficiency of worm wheels. These include the tooth profile, helix angle, material selection, and manufacturing tolerances. The tooth profile and helix angle can influence the contact pattern and the distribution of loads, affecting efficiency. The choice of materials with low friction coefficients and good wear resistance can help improve efficiency. Additionally, maintaining tight manufacturing tolerances ensures proper meshing and reduces energy losses due to misalignment or backlash.
  • Operating Conditions: The operating conditions, such as the applied load, speed, and temperature, can also affect the efficiency of worm wheels. Higher loads and speeds can lead to increased friction and energy losses, reducing efficiency. Elevated temperatures can cause lubricant degradation, increased viscosity, and higher friction, further impacting efficiency. Therefore, operating within the specified load and speed limits and maintaining suitable operating temperatures are essential for optimizing efficiency.

In summary, worm wheels have a notable impact on the overall efficiency of gearing systems. While they offer high gear reduction ratios and self-locking capabilities, they also introduce inherent efficiency losses due to friction and sliding action. Proper lubrication, suitable design considerations, and operating within specified limits are essential for maximizing the efficiency of worm gear systems.

In what industries or applications are worm wheels commonly utilized?

Worm wheels, in conjunction with worm gears, find wide applications across various industries that require precise motion control, high torque, and compact design. Here’s a detailed explanation of the industries and applications where worm wheels are commonly utilized:

1. Automotive Industry: Worm wheels are used in automotive applications, such as power steering systems. They provide the necessary gear reduction to convert the rotational motion from the steering wheel into the appropriate steering force, enabling smooth and responsive steering control.

2. Industrial Machinery: Worm wheels are widely employed in various industrial machinery applications, including machine tools, conveyors, packaging machines, and material handling equipment. They provide reliable and efficient power transmission, enabling precise control of speed and torque in these systems.

3. Elevators: Worm wheels play a vital role in elevator systems, where they are used in the elevator drive mechanism to control the movement of the elevator car. They provide the necessary gear reduction to ensure smooth and controlled vertical motion, along with the ability to hold the car in position when the power is removed.

4. Robotics: Worm wheels are commonly utilized in robotic systems, particularly in robot joints and manipulators. They allow for precise and controlled movement, enabling robots to perform intricate tasks with accuracy and repeatability.

5. Printing Presses: Printing presses often employ worm wheels in their drive systems. The worm gear and worm wheel combination helps in achieving the required gear reduction for controlling the paper feed and maintaining consistent print quality.

6. Conveyor Systems: Worm wheels are found in conveyor systems that require controlled and synchronized movement of goods or materials. They provide the necessary torque and gear reduction to ensure smooth and efficient operation of the conveyor belts or rollers.

7. Agriculture and Farming: Worm wheels are utilized in various agricultural machinery, such as tractor attachments, harvesting equipment, and irrigation systems. They facilitate the transmission of power and control the rotational motion required for specific farming operations.

8. Renewable Energy: Worm wheels are used in renewable energy applications, including wind turbines and solar tracking systems. They help in achieving the required gear reduction to optimize power generation and ensure efficient tracking of the sun or wind direction.

9. Food Processing: Worm wheels are employed in food processing equipment, such as mixers, grinders, and dough kneaders. They provide the necessary gear reduction and enable precise control of rotational speed for efficient food preparation and processing.

10. Medical Equipment: Worm wheels find applications in medical equipment, such as surgical robots, imaging devices, and patient positioning systems. They contribute to precise and controlled movements, enabling accurate medical procedures and patient care.

These are just a few examples of the industries and applications where worm wheels are commonly utilized. Their ability to provide high gear reduction, compact design, and reliable power transmission makes them suitable for a wide range of mechanical systems that require precise motion control and high torque output.

China Standard Planar Double Enveloping Worm Gear Unit with Hollow Shaft  China Standard Planar Double Enveloping Worm Gear Unit with Hollow Shaft
editor by Dream 2024-05-06